Valera - Action Super Plus 1600 white/chrome wall-mounted hair dryer with holder 038A
€62.01
| Quantity | Unit price |
|---|---|
| To 9 |
€62.01
|
| To 24 |
€60.15
|
| From 25 |
€58.91
|
Available, delivery time: delivered within 2–5 business days
Product information "Action Super Plus 1600 white/chrome wall-mounted hair dryer with holder 038A"
Action Super Plus 1600 in white with 038A wall holder
The Action Super Plus 1600 (type 542.06/038A, Valera item 55420049) is a handheld hairdryer with 1600 W that hangs in the 038A wall holder: the unit has a fixed place on the wall and is moved freely for drying. At Valera this colour is called “White Chrome”; the range is also listed there in “Black Chrome” and “All Black”.
Operation
Two air flow settings and three temperature settings are selected with the slide switch, and there is an on/off push button on the handle. A cool air setting is available. The heating element is built in the “Ripple wire” design. A concentrator nozzle is included.
038A wall holder
The supplied 038A wall holder has an on/off safety switch. The dryer hangs in the holder on the wall and therefore stays in the same place. This holder does not have a shaver socket – that belongs to the Shaver versions in the table further down.
Safety and electrical data
- Double insulated, class II – no earth connection required
- Thermal cut-out: switches off if the dryer overheats and resets itself after a few minutes of cooling
- Maximum current draw 10 A
- Installation cable type H05VV-F 2 × 1.5 mm²
- Sound pressure level below 70 dB(A)
The operating voltage is stated on the rating plate of the appliance. Warranty: 24 months for private end users, 12 months for commercial end users (Switzerland and EU).
The range at a glance
| Model | Output | Colour | Wall holder | Shaver socket |
|---|---|---|---|---|
| Action Super Plus 1800 white | 1800 W | white | 038A | no |
| Action Super Plus 1600 white (this product) | 1600 W | white | 038A | no |
| Action Super Plus 1600 Shaver white | 1600 W | white | not specified | yes |
| Action Super Plus 1600 Shaver silver | 1600 W | silver | not specified | yes |
| Action Super Plus 1200 white | 1200 W | white | 038A | no |
| Action Super Plus 1200 black | 1200 W | black | 038A | no |
0 of 0 reviews
No reviews yet
Login
Similar products
Hair dryer with press and hold button for guest rooms and public areas The Action 1200 Push is a 1.200 W hair dryer with an on/off push button that has to be held down. Let go and the appliance stops. Valera describes the switching as Slide switch with 2 airflow and 3 temperature settings, COOL setting. Short verdict The push button is not a detail here, it is the point: an appliance that cannot stay running will not overheat in an empty room and draws no power when nobody is watching. For guest rooms, changing rooms, swimming pools and gyms. A cool setting is included. Three reasons for this model Press and hold button – the dryer runs only while the button is pressed and stops by itself when released. 1.200 W – with slide switch with 2 airflow and 3 temperature settings, COOL setting. Ripple wire SECURITY heating element – plus an overheat cut-out that resets itself once cooled. Specification Power1.200 W OperationOn/off push button, pressure must be maintained SettingsSlide switch with 2 airflow and 3 temperature settings, COOL setting Heating elementRipple wire SECURITY heating element NozzleConcentrator nozzle CableCoiled cable Overheat protectionSafety cut-out, resets itself once cooled ColourblackModel542.05 BL, manufacturer number 55420952 Suitable for Guest rooms, holiday flats, changing rooms and spa areas – anywhere an appliance must not keep running unattended. Less suitable for Anyone drying for long stretches will find constant pressure on the button tiring – for salons a professional dryer with a latching switch is the better choice. No wall bracket is documented for this model; it is a hand-held appliance. Why do hotel hair dryers have a button you must hold down? Because an appliance that only runs while the button is pressed cannot be left switched on by accident. That prevents overheating in an empty room, saves energy and extends service life. In public washrooms and changing rooms it is the usual design. Push button or latching switch? A latching switch stays where you put it. A push button falls back to off the moment you release it. For guest rooms that is precisely the difference that matters. What does Valera not state for this model? Voltage, frequency, motor type, airflow in m³/h, air temperature in °C, weight, noise level, cable length, protection class and IP rating are not given in the manufacturer documents available to us.
Hair dryer with press and hold button for guest rooms and public areas The Action 1200 Push is a 1.200 W hair dryer with an on/off push button that has to be held down. Let go and the appliance stops. Valera describes the switching as Slide switch with 2 airflow and 3 temperature settings, COOL setting. Short verdict The push button is not a detail here, it is the point: an appliance that cannot stay running will not overheat in an empty room and draws no power when nobody is watching. For guest rooms, changing rooms, swimming pools and gyms. A cool setting is included. Three reasons for this model Press and hold button – the dryer runs only while the button is pressed and stops by itself when released. 1.200 W – with slide switch with 2 airflow and 3 temperature settings, COOL setting. Ripple wire SECURITY heating element – plus an overheat cut-out that resets itself once cooled. Specification Power1.200 W OperationOn/off push button, pressure must be maintained SettingsSlide switch with 2 airflow and 3 temperature settings, COOL setting Heating elementRipple wire SECURITY heating element NozzleConcentrator nozzle CableCoiled cable Overheat protectionSafety cut-out, resets itself once cooled Colourblack/chromeModel542.05 B/C, manufacturer number 55420034 Suitable for Guest rooms, holiday flats, changing rooms and spa areas – anywhere an appliance must not keep running unattended. Less suitable for Anyone drying for long stretches will find constant pressure on the button tiring – for salons a professional dryer with a latching switch is the better choice. No wall bracket is documented for this model; it is a hand-held appliance. Why do hotel hair dryers have a button you must hold down? Because an appliance that only runs while the button is pressed cannot be left switched on by accident. That prevents overheating in an empty room, saves energy and extends service life. In public washrooms and changing rooms it is the usual design. Push button or latching switch? A latching switch stays where you put it. A push button falls back to off the moment you release it. For guest rooms that is precisely the difference that matters. What does Valera not state for this model? Voltage, frequency, motor type, airflow in m³/h, air temperature in °C, weight, noise level, cable length, protection class and IP rating are not given in the manufacturer documents available to us.
Hair dryer with press and hold button for guest rooms and public areas The Action 1200 Push is a 1.200 W hair dryer with an on/off push button that has to be held down. Let go and the appliance stops. Valera describes the switching as Slide switch with 2 airflow and 3 temperature settings, COOL setting. Short verdict The push button is not a detail here, it is the point: an appliance that cannot stay running will not overheat in an empty room and draws no power when nobody is watching. For guest rooms, changing rooms, swimming pools and gyms. A cool setting is included. Three reasons for this model Press and hold button – the dryer runs only while the button is pressed and stops by itself when released. 1.200 W – with slide switch with 2 airflow and 3 temperature settings, COOL setting. Ripple wire SECURITY heating element – plus an overheat cut-out that resets itself once cooled. Specification Power1.200 W OperationOn/off push button, pressure must be maintained SettingsSlide switch with 2 airflow and 3 temperature settings, COOL setting Heating elementRipple wire SECURITY heating element NozzleConcentrator nozzle CableCoiled cable Overheat protectionSafety cut-out, resets itself once cooled Colourwhite/chromeModel542.05 W/C, manufacturer number 55420915 Suitable for Guest rooms, holiday flats, changing rooms and spa areas – anywhere an appliance must not keep running unattended. Less suitable for Anyone drying for long stretches will find constant pressure on the button tiring – for salons a professional dryer with a latching switch is the better choice. No wall bracket is documented for this model; it is a hand-held appliance. Why do hotel hair dryers have a button you must hold down? Because an appliance that only runs while the button is pressed cannot be left switched on by accident. That prevents overheating in an empty room, saves energy and extends service life. In public washrooms and changing rooms it is the usual design. Push button or latching switch? A latching switch stays where you put it. A push button falls back to off the moment you release it. For guest rooms that is precisely the difference that matters. What does Valera not state for this model? Voltage, frequency, motor type, airflow in m³/h, air temperature in °C, weight, noise level, cable length, protection class and IP rating are not given in the manufacturer documents available to us.
Hair dryer with press and hold button for guest rooms and public areas The Action 1800 Push is a 1.800 W hair dryer with an on/off push button that has to be held down. Let go and the appliance stops. Valera describes the switching as Slide switch with 2 airflow and 3 temperature settings, COOL setting. Short verdict The push button is not a detail here, it is the point: an appliance that cannot stay running will not overheat in an empty room and draws no power when nobody is watching. For guest rooms, changing rooms, swimming pools and gyms. A cool setting is included. Three reasons for this model Press and hold button – the dryer runs only while the button is pressed and stops by itself when released. 1.800 W – with slide switch with 2 airflow and 3 temperature settings, COOL setting. Ripple wire SECURITY heating element – plus an overheat cut-out that resets itself once cooled. Specification Power1.800 W OperationOn/off push button, pressure must be maintained SettingsSlide switch with 2 airflow and 3 temperature settings, COOL setting Heating elementRipple wire SECURITY heating element NozzleConcentrator nozzle CableCoiled cable Overheat protectionSafety cut-out, resets itself once cooled ColourblackModel542.14 BL, manufacturer number 55420958 Suitable for Guest rooms, holiday flats, changing rooms and spa areas – anywhere an appliance must not keep running unattended. Less suitable for Anyone drying for long stretches will find constant pressure on the button tiring – for salons a professional dryer with a latching switch is the better choice. No wall bracket is documented for this model; it is a hand-held appliance. Why do hotel hair dryers have a button you must hold down? Because an appliance that only runs while the button is pressed cannot be left switched on by accident. That prevents overheating in an empty room, saves energy and extends service life. In public washrooms and changing rooms it is the usual design. Push button or latching switch? A latching switch stays where you put it. A push button falls back to off the moment you release it. For guest rooms that is precisely the difference that matters. What does Valera not state for this model? Voltage, frequency, motor type, airflow in m³/h, air temperature in °C, weight, noise level, cable length, protection class and IP rating are not given in the manufacturer documents available to us.
Hair dryer with press and hold button for guest rooms and public areas The Action 1800 Push is a 1.800 W hair dryer with an on/off push button that has to be held down. Let go and the appliance stops. Valera describes the switching as Slide switch with 2 airflow and 3 temperature settings, COOL setting. Short verdict The push button is not a detail here, it is the point: an appliance that cannot stay running will not overheat in an empty room and draws no power when nobody is watching. For guest rooms, changing rooms, swimming pools and gyms. A cool setting is included. Three reasons for this model Press and hold button – the dryer runs only while the button is pressed and stops by itself when released. 1.800 W – with slide switch with 2 airflow and 3 temperature settings, COOL setting. Ripple wire SECURITY heating element – plus an overheat cut-out that resets itself once cooled. Specification Power1.800 W OperationOn/off push button, pressure must be maintained SettingsSlide switch with 2 airflow and 3 temperature settings, COOL setting Heating elementRipple wire SECURITY heating element NozzleConcentrator nozzle CableCoiled cable Overheat protectionSafety cut-out, resets itself once cooled Colourblack/chromeModel542.14 B/C, manufacturer number 55420075 Suitable for Guest rooms, holiday flats, changing rooms and spa areas – anywhere an appliance must not keep running unattended. Less suitable for Anyone drying for long stretches will find constant pressure on the button tiring – for salons a professional dryer with a latching switch is the better choice. No wall bracket is documented for this model; it is a hand-held appliance. Why do hotel hair dryers have a button you must hold down? Because an appliance that only runs while the button is pressed cannot be left switched on by accident. That prevents overheating in an empty room, saves energy and extends service life. In public washrooms and changing rooms it is the usual design. Push button or latching switch? A latching switch stays where you put it. A push button falls back to off the moment you release it. For guest rooms that is precisely the difference that matters. What does Valera not state for this model? Voltage, frequency, motor type, airflow in m³/h, air temperature in °C, weight, noise level, cable length, protection class and IP rating are not given in the manufacturer documents available to us.
Hair dryer with press and hold button for guest rooms and public areas The Action 1800 Push is a 1.800 W hair dryer with an on/off push button that has to be held down. Let go and the appliance stops. Valera describes the switching as Slide switch with 2 airflow and 3 temperature settings, COOL setting. Short verdict The push button is not a detail here, it is the point: an appliance that cannot stay running will not overheat in an empty room and draws no power when nobody is watching. For guest rooms, changing rooms, swimming pools and gyms. A cool setting is included. Three reasons for this model Press and hold button – the dryer runs only while the button is pressed and stops by itself when released. 1.800 W – with slide switch with 2 airflow and 3 temperature settings, COOL setting. Ripple wire SECURITY heating element – plus an overheat cut-out that resets itself once cooled. Specification Power1.800 W OperationOn/off push button, pressure must be maintained SettingsSlide switch with 2 airflow and 3 temperature settings, COOL setting Heating elementRipple wire SECURITY heating element NozzleConcentrator nozzle CableCoiled cable Overheat protectionSafety cut-out, resets itself once cooled Colourwhite/chromeModel542.14 W/C, manufacturer number 55420916 Suitable for Guest rooms, holiday flats, changing rooms and spa areas – anywhere an appliance must not keep running unattended. Less suitable for Anyone drying for long stretches will find constant pressure on the button tiring – for salons a professional dryer with a latching switch is the better choice. No wall bracket is documented for this model; it is a hand-held appliance. Why do hotel hair dryers have a button you must hold down? Because an appliance that only runs while the button is pressed cannot be left switched on by accident. That prevents overheating in an empty room, saves energy and extends service life. In public washrooms and changing rooms it is the usual design. Push button or latching switch? A latching switch stays where you put it. A push button falls back to off the moment you release it. For guest rooms that is precisely the difference that matters. What does Valera not state for this model? Voltage, frequency, motor type, airflow in m³/h, air temperature in °C, weight, noise level, cable length, protection class and IP rating are not given in the manufacturer documents available to us.
Wall mounted hair dryer with mains socket and RCD The Action PROTECT 1600 Socket combines a 1600 W wall mounted hair dryer with a full 16 A European socket in the wall holder. According to Valera the holder also contains a residual current device called ELECTROSTOP, rated at 10 mA. Short verdict The answer for hotel bathrooms where guests need a socket anyway: straighteners, chargers, electric toothbrushes. Instead of a separate bathroom socket it sits in the holder, behind the 10 mA protection. If you only want to supply shavers, a shaver socket is the better fit – it is limited to about 20 VA and therefore harder to misuse. Three reasons for this model 16 A European socket – an ordinary mains socket in the wall holder, not restricted to shavers. ELECTROSTOP rated at 10 mA – residual current device in the holder, per manufacturer. Distribution boards usually use 30 mA. Slide switch with cool setting – two airflow and three temperature settings including COOL. Specification Power1600 W SettingsSlide switch: 2 airflow, 3 temperature settings Cool settingYes, COOL OperationOn/off push button SocketEuropean standard socket, 16 A, in the wall holder Residual current deviceELECTROSTOP, 10 mA, in the wall holder Heating elementRipple wire SECURITY heating element Safety switchAutomatic on/off via the holder Overheat protectionSafety cut-out, resets itself once cooled Supply cable on siteH05VV-F 3G × 2.5 mm² – with protective earth NozzleConcentrator nozzle InstallationWall mounting, plugs and screws supplied Model542.06/044.03, manufacturer number 55420930 Suitable for Hotel bathrooms and guest rooms where dryer and socket should sit in one place. Less suitable for If you deliberately want the socket limited to shavers, choose a shaver socket version instead. Unlike the double insulated models in this range, this version needs a supply with a protective earth – worth noting at planning stage. Installation is a job for a qualified electrician, typically from a switched fused spur. How does a mains socket differ from a shaver socket? A shaver socket works through a safety isolating transformer and is limited to roughly 20 VA, so it is explicitly for shavers only – in the UK it is classed as a shaver supply unit under BS EN 61558-2-5. This is an ordinary 16 A socket: more flexible for guests, but without that limit. Do I still need an RCD in the consumer unit? The device in the holder supplements the installation, it does not replace it. What your building requires is for a qualified electrician to determine under the wiring regulations that apply locally. What does Valera not state for this model? Motor type, airflow in m³/h, air temperature in °C, weight, noise level, IP rating and whether a removable filter is fitted are not given in the manufacturer documents available to us. We will add them once Valera confirms them.
Wall mounted hair dryer for the guest room The Action Super Plus 1200 is a wall mounted hair dryer rated 1.200 W. Switching: Slide switch with 2 airflow and 3 temperature settings, COOL setting. The wall holder supplied, type 038A, has its own on/off safety switch. Short verdict The better equipped version: at Valera „Super“ means the slide switch with settings and a cool position. The plain versions in the same range have a single fixed setting. Three reasons for this model 1.200 W for wall mounting – the wall holder is part of the delivery. Wall holder 038A with on/off safety switch Press and hold button – the dryer runs only while the button is pressed and stops when released. Specification Power1.200 W SettingsSlide switch with 2 airflow and 3 temperature settings, COOL setting OperationPress and hold button Heating elementRipple wire SECURITY heating element Wall holderType 038A with on/off safety switch, supplied NozzleConcentrator nozzle Protection classClass II, double insulated, no earth connection Overheat protectionSafety cut-out, resets itself once cooled Supply cable on siteH05VV-F 2 × 1.5 mm², max input current 10 A Model542.05/038A BL, manufacturer number 55420950 Suitable for Guest rooms, guest houses and holiday flats with fixed wall mounting. Less suitable for Valera excludes warranty for continuous use in gym and spa areas – the professional models belong there. Installation is a job for a qualified electrician, typically from a switched fused spur; the appliance is hardwired. What does 038A mean compared with 038B? Both are vertical housing wall holders of the same design. 038A has an on/off safety switch, 038B comes without a switch and is wired directly to the mains. The manufacturer instructions record no other difference. What separates „Super“ from the plain version? The settings, nothing else. The Super versions have the slide switch with selectable settings, the plain versions a single fixed setting. Power, heating element, nozzle and holder design are the same. What does Valera not state for this model? Voltage, frequency, motor type, airflow in m³/h, air temperature in °C, weight, noise level and IP rating are not given in the manufacturer documents available to us.