1911.0467 LI Pro LCD Clipper Black – Returned Product
Wahl 1911.0465 Lithium Pro LCD Clipper black Returned goods LCD charge indicator Up to 100 minutes running time 1 minute quick charge for 3 minutes running time Can also be used in network operation Made in Europe Cutting set "Made in Germany" Minimum cutting length 1mm Delivery: LCD hair cutter with lithium-ion battery Protector Storage case crest oil Cleaning brush scissors Attachment combs (3 mm, 6 mm, 9 mm, 12 mm, 18 mm, 25 mm) Instructions for use Product condition: Returned product from customer recall Unit is tested and unused The packaging may show signs of shipping Full warranty Scope of delivery: complete
7 Stars Wall Mounted Hair Dryer Classic
Hardwired wall-mounted hair dryer for hotels, spas and changing roomsThe Elchim 7 Stars Classic is a wall-mounted hair dryer for hotels, fitness centres and spas. It is hardwired and has no plug; installation must be carried out by a qualified electrician. The fixed connection means it does not occupy a socket in the guest bathroom.Three heat settings and two fan speeds let you adjust heat and airflow separately. A cold-air setting is also available. Elchim specifies a professional AC motor of 1,400 to 1,600 watts for the range and states that it uses Italian-made components.The filter is removable and accessible for cleaning. The extendable coiled cable provides room to move while drying. The Classic version is operated with a conventional on/off switch.Plan before orderingThis appliance has no plug and must be hardwired. Installation must be carried out by a qualified electrician and is not intended as a DIY task. Allow for the appointment and installation costs.At a glanceA fixed hair dryer for guest bathrooms and shared changing rooms. The hardwired connection leaves a socket free, and the removable filter is accessible for cleaning. A professionally planned electrical installation is required.Three reasons to choose this applianceHardwired connection – does not occupy a socket in the guest bathroom.Removable filter – accessible for cleaning.Three heat settings and two fan speeds – adjust heat and airflow separately.Suitable forHotel rooms and guest bathrooms, fitness-centre changing rooms, spas and wellness areas: places where the electrical installation can be planned, the appliance remains fixed in place, and cleaning is part of routine maintenance.Less suitable forWorkstations that require a freely movable handheld hair dryer, and locations where a hardwired connection is not permitted.Does installation require an electrician?Yes. The appliance has no plug and must be hardwired. Installation must be carried out by a qualified electrician.Can the filter be cleaned?Yes. Elchim specifies a removable filter for the range that can be taken out for cleaning.Does the appliance stay securely in place?It is hardwired and wall-mounted. Elchim also describes the holder as a theft deterrent. That is not an absolute guarantee against theft.
7 Stars wall-mounted hair dryer with safety switch
Italian wall-mounted hair dryer for hotels, gyms and spas The 7 Stars is the hotel wall-mounted hair dryer from elchim, an Italian manufacturer that otherwise mainly builds professional dryers for hair salons. You can tell from the motor: elchim uses a professional AC motor and describes the components as “all made in Italy”. The wall holder is theft-proof, so the unit stays where it belongs. Safety switch or Classic? This version has a safety switch on the holder. The 7 Stars Classic version does without this switch. Where guests dry their hair unsupervised – in a gym changing area, in a spa or in a hotel bathroom – the switch is the safe choice. Why a salon manufacturer in the hotel bathroom? Because conditions there are similar to a salon: many users, daily running time and little patience with weak appliances. An AC motor is built for this kind of continuous use, while simple DC motors from household appliances wear out faster. The removable filter keeps hair and lint away from the motor and is quick to clean. Features Two speed and three heat settings, plus a cool shot to set the style. The spiral cable extends and does not tangle. According to elchim, the unit operates at 220–240 V. Technical data Power: 1,400 W (elchim states 1,400–1,600 W for the 7 Stars range) Professional AC motor 2 speed and 3 heat settings, cool shot Extendable spiral cable, plug connection Anti-theft wall holder with safety switch, removable filter, double insulated (protection class II) You will find more appliances for guest bathrooms and wellness areas under Hotel hair dryers; how requirements differ by star category is shown in our guide Hair dryers by hotel category.
79111-1616 Close Cut Pro
Wahl 79111-1616 Close Cut Pro Haircutting and Grooming Kit - Precision ground, self-sharpening cutting set with ultra-fine teeth for long-lasting sharpness- With different attachment combs for the perfect cut- Blades without overlap for an extra short cut (0.6 mm)Operating Voltage: 220-230 V, 50 HzOperating mode: network operators with cableDelivery:• Net hair cutting machine• Knife protection• Storage case•Crest•Oil• Cleaning brush•Scissors• 6 crimping combs (1.5 mm, 3 mm, 4.5 mm, 6 mm, 10 mm, 13 mm)• Instructions for use
79524-216 Chrome Pro mains power hair clipper
Wahl 79524-216 Chrome Pro mains power hair clipper - Precision self-sharpening blade set for long-lasting sharpness - With various dennen combs for the perfect cut, even in difficult angles - Customizable bevel - and each section sitting - Excellent for neck shave Also suitable for full body hair to remove body hair (swimmers, cyclists and other athletes)! Operating voltage: 220-230 V, 50 Hz mode: Power plants with Cable Delivery: Cordless hair clipper knife protection storage box crest oil cleaning brush scissors cape 2 hairclips 10 Combs (3, 6, 10, 13, 16, 19, 22 and 25 mm), Aufschiebekamm for right and left ear instructions
9880-116 Lithium Ionen All in One Shaver
Wahl Lithium Ionen All in One Shaver Wahl Lithium Ionen All in One Shaver with exchangeable unit for: - Razor for an ultra smooth shave - Precision Trimmer - trim, cut and define edges - Precision detail trimmer - Complex designs or trimming hair in ear, nose and brow Shaving System: Float Technology with 3 rotary heads - Modern cutting system shaver follows the contours of your face - for a smooth and refreshing shave Lithium-Ion technology: Up to 2 hours of battery life in just 1 hour charging time. 3 minutes quick charge fo 5 minutes operation. Thanks to worldwide voltage adjustment (100-240 V, 50/60 Hz) perfect for travel. 2 years warranty Delivery: Li-unit shaving Trimmer full metal cutting set Detailed full metal cutting set 3 combs 1 comb variable Storage rack Reiseetui crest cleaning brush Cutting set oil
9953-1016 Groomsman Body
Wahl Groomsman Body Groomsman Wahl body, the body groomers & Beard Trimmer in one Precision-ground cutting set for long-lasting sharpness. 306 ° rotating head Comb for 6 positions. 3 custom beard combs. mode: Battery unit, 60 minutes running time Operating voltage: 230 V, 50 Hz Delivery: Body trimmer trimmer attachment Full article Foil shaving head with cap Standard combs for: 3-day beard (1.5mm), Onewhisker (3 mm), Beard (4.5 mm) 6-way adjustable comb (2, 4, 6, 8, 10 and 12 mm) Power Supply cleaning brush Bart Crest blade oil Storage station instructions
9953-1016 Groomsman Body Returned goods
Wahl Groomsman Body Groomsman Wahl body, the body groomers & Beard Trimmer in one Precision-ground cutting set for long-lasting sharpness. 306 ° rotating head Comb for 6 positions. 3 custom beard combs. mode: Battery unit, 60 minutes running time Operating voltage: 230 V, 50 Hz Delivery: Body trimmer trimmer attachment Full article Foil shaving head with cap Standard combs for: 3-day beard (1.5mm), Onewhisker (3 mm), Beard (4.5 mm) 6-way adjustable comb (2, 4, 6, 8, 10 and 12 mm) Power Supply cleaning brush Bart Crest blade oil Storage station instructions Product condition: Returned product from customer recall Unit is tested and unused The packaging may show signs of shipping Full warranty Scope of delivery: complete
Action 1200 Push black hair dryer with press and hold button
Hair dryer with press and hold button for guest rooms and public areas The Action 1200 Push is a 1.200 W hair dryer with an on/off push button that has to be held down. Let go and the appliance stops. Valera describes the switching as Slide switch with 2 airflow and 3 temperature settings, COOL setting. Short verdict The push button is not a detail here, it is the point: an appliance that cannot stay running will not overheat in an empty room and draws no power when nobody is watching. For guest rooms, changing rooms, swimming pools and gyms. A cool setting is included. Three reasons for this model Press and hold button – the dryer runs only while the button is pressed and stops by itself when released. 1.200 W – with slide switch with 2 airflow and 3 temperature settings, COOL setting. Ripple wire SECURITY heating element – plus an overheat cut-out that resets itself once cooled. Specification Power1.200 W OperationOn/off push button, pressure must be maintained SettingsSlide switch with 2 airflow and 3 temperature settings, COOL setting Heating elementRipple wire SECURITY heating element NozzleConcentrator nozzle CableCoiled cable Overheat protectionSafety cut-out, resets itself once cooled ColourblackModel542.05 BL, manufacturer number 55420952 Suitable for Guest rooms, holiday flats, changing rooms and spa areas – anywhere an appliance must not keep running unattended. Less suitable for Anyone drying for long stretches will find constant pressure on the button tiring – for salons a professional dryer with a latching switch is the better choice. No wall bracket is documented for this model; it is a hand-held appliance. Why do hotel hair dryers have a button you must hold down? Because an appliance that only runs while the button is pressed cannot be left switched on by accident. That prevents overheating in an empty room, saves energy and extends service life. In public washrooms and changing rooms it is the usual design. Push button or latching switch? A latching switch stays where you put it. A push button falls back to off the moment you release it. For guest rooms that is precisely the difference that matters. What does Valera not state for this model? Voltage, frequency, motor type, airflow in m³/h, air temperature in °C, weight, noise level, cable length, protection class and IP rating are not given in the manufacturer documents available to us.
Action 1200 Push black/chrome hair dryer with press and hold button
Hair dryer with press and hold button for guest rooms and public areas The Action 1200 Push is a 1.200 W hair dryer with an on/off push button that has to be held down. Let go and the appliance stops. Valera describes the switching as Slide switch with 2 airflow and 3 temperature settings, COOL setting. Short verdict The push button is not a detail here, it is the point: an appliance that cannot stay running will not overheat in an empty room and draws no power when nobody is watching. For guest rooms, changing rooms, swimming pools and gyms. A cool setting is included. Three reasons for this model Press and hold button – the dryer runs only while the button is pressed and stops by itself when released. 1.200 W – with slide switch with 2 airflow and 3 temperature settings, COOL setting. Ripple wire SECURITY heating element – plus an overheat cut-out that resets itself once cooled. Specification Power1.200 W OperationOn/off push button, pressure must be maintained SettingsSlide switch with 2 airflow and 3 temperature settings, COOL setting Heating elementRipple wire SECURITY heating element NozzleConcentrator nozzle CableCoiled cable Overheat protectionSafety cut-out, resets itself once cooled Colourblack/chromeModel542.05 B/C, manufacturer number 55420034 Suitable for Guest rooms, holiday flats, changing rooms and spa areas – anywhere an appliance must not keep running unattended. Less suitable for Anyone drying for long stretches will find constant pressure on the button tiring – for salons a professional dryer with a latching switch is the better choice. No wall bracket is documented for this model; it is a hand-held appliance. Why do hotel hair dryers have a button you must hold down? Because an appliance that only runs while the button is pressed cannot be left switched on by accident. That prevents overheating in an empty room, saves energy and extends service life. In public washrooms and changing rooms it is the usual design. Push button or latching switch? A latching switch stays where you put it. A push button falls back to off the moment you release it. For guest rooms that is precisely the difference that matters. What does Valera not state for this model? Voltage, frequency, motor type, airflow in m³/h, air temperature in °C, weight, noise level, cable length, protection class and IP rating are not given in the manufacturer documents available to us.
Action 1200 Push white/chrome hair dryer with press and hold button
Hair dryer with press and hold button for guest rooms and public areas The Action 1200 Push is a 1.200 W hair dryer with an on/off push button that has to be held down. Let go and the appliance stops. Valera describes the switching as Slide switch with 2 airflow and 3 temperature settings, COOL setting. Short verdict The push button is not a detail here, it is the point: an appliance that cannot stay running will not overheat in an empty room and draws no power when nobody is watching. For guest rooms, changing rooms, swimming pools and gyms. A cool setting is included. Three reasons for this model Press and hold button – the dryer runs only while the button is pressed and stops by itself when released. 1.200 W – with slide switch with 2 airflow and 3 temperature settings, COOL setting. Ripple wire SECURITY heating element – plus an overheat cut-out that resets itself once cooled. Specification Power1.200 W OperationOn/off push button, pressure must be maintained SettingsSlide switch with 2 airflow and 3 temperature settings, COOL setting Heating elementRipple wire SECURITY heating element NozzleConcentrator nozzle CableCoiled cable Overheat protectionSafety cut-out, resets itself once cooled Colourwhite/chromeModel542.05 W/C, manufacturer number 55420915 Suitable for Guest rooms, holiday flats, changing rooms and spa areas – anywhere an appliance must not keep running unattended. Less suitable for Anyone drying for long stretches will find constant pressure on the button tiring – for salons a professional dryer with a latching switch is the better choice. No wall bracket is documented for this model; it is a hand-held appliance. Why do hotel hair dryers have a button you must hold down? Because an appliance that only runs while the button is pressed cannot be left switched on by accident. That prevents overheating in an empty room, saves energy and extends service life. In public washrooms and changing rooms it is the usual design. Push button or latching switch? A latching switch stays where you put it. A push button falls back to off the moment you release it. For guest rooms that is precisely the difference that matters. What does Valera not state for this model? Voltage, frequency, motor type, airflow in m³/h, air temperature in °C, weight, noise level, cable length, protection class and IP rating are not given in the manufacturer documents available to us.
Action 1800 Push black hair dryer with press and hold button
Hair dryer with press and hold button for guest rooms and public areas The Action 1800 Push is a 1.800 W hair dryer with an on/off push button that has to be held down. Let go and the appliance stops. Valera describes the switching as Slide switch with 2 airflow and 3 temperature settings, COOL setting. Short verdict The push button is not a detail here, it is the point: an appliance that cannot stay running will not overheat in an empty room and draws no power when nobody is watching. For guest rooms, changing rooms, swimming pools and gyms. A cool setting is included. Three reasons for this model Press and hold button – the dryer runs only while the button is pressed and stops by itself when released. 1.800 W – with slide switch with 2 airflow and 3 temperature settings, COOL setting. Ripple wire SECURITY heating element – plus an overheat cut-out that resets itself once cooled. Specification Power1.800 W OperationOn/off push button, pressure must be maintained SettingsSlide switch with 2 airflow and 3 temperature settings, COOL setting Heating elementRipple wire SECURITY heating element NozzleConcentrator nozzle CableCoiled cable Overheat protectionSafety cut-out, resets itself once cooled ColourblackModel542.14 BL, manufacturer number 55420958 Suitable for Guest rooms, holiday flats, changing rooms and spa areas – anywhere an appliance must not keep running unattended. Less suitable for Anyone drying for long stretches will find constant pressure on the button tiring – for salons a professional dryer with a latching switch is the better choice. No wall bracket is documented for this model; it is a hand-held appliance. Why do hotel hair dryers have a button you must hold down? Because an appliance that only runs while the button is pressed cannot be left switched on by accident. That prevents overheating in an empty room, saves energy and extends service life. In public washrooms and changing rooms it is the usual design. Push button or latching switch? A latching switch stays where you put it. A push button falls back to off the moment you release it. For guest rooms that is precisely the difference that matters. What does Valera not state for this model? Voltage, frequency, motor type, airflow in m³/h, air temperature in °C, weight, noise level, cable length, protection class and IP rating are not given in the manufacturer documents available to us.
Action 1800 Push black/chrome hair dryer with press and hold button
Hair dryer with press and hold button for guest rooms and public areas The Action 1800 Push is a 1.800 W hair dryer with an on/off push button that has to be held down. Let go and the appliance stops. Valera describes the switching as Slide switch with 2 airflow and 3 temperature settings, COOL setting. Short verdict The push button is not a detail here, it is the point: an appliance that cannot stay running will not overheat in an empty room and draws no power when nobody is watching. For guest rooms, changing rooms, swimming pools and gyms. A cool setting is included. Three reasons for this model Press and hold button – the dryer runs only while the button is pressed and stops by itself when released. 1.800 W – with slide switch with 2 airflow and 3 temperature settings, COOL setting. Ripple wire SECURITY heating element – plus an overheat cut-out that resets itself once cooled. Specification Power1.800 W OperationOn/off push button, pressure must be maintained SettingsSlide switch with 2 airflow and 3 temperature settings, COOL setting Heating elementRipple wire SECURITY heating element NozzleConcentrator nozzle CableCoiled cable Overheat protectionSafety cut-out, resets itself once cooled Colourblack/chromeModel542.14 B/C, manufacturer number 55420075 Suitable for Guest rooms, holiday flats, changing rooms and spa areas – anywhere an appliance must not keep running unattended. Less suitable for Anyone drying for long stretches will find constant pressure on the button tiring – for salons a professional dryer with a latching switch is the better choice. No wall bracket is documented for this model; it is a hand-held appliance. Why do hotel hair dryers have a button you must hold down? Because an appliance that only runs while the button is pressed cannot be left switched on by accident. That prevents overheating in an empty room, saves energy and extends service life. In public washrooms and changing rooms it is the usual design. Push button or latching switch? A latching switch stays where you put it. A push button falls back to off the moment you release it. For guest rooms that is precisely the difference that matters. What does Valera not state for this model? Voltage, frequency, motor type, airflow in m³/h, air temperature in °C, weight, noise level, cable length, protection class and IP rating are not given in the manufacturer documents available to us.
Action 1800 Push white/chrome hair dryer with press and hold button
Hair dryer with press and hold button for guest rooms and public areas The Action 1800 Push is a 1.800 W hair dryer with an on/off push button that has to be held down. Let go and the appliance stops. Valera describes the switching as Slide switch with 2 airflow and 3 temperature settings, COOL setting. Short verdict The push button is not a detail here, it is the point: an appliance that cannot stay running will not overheat in an empty room and draws no power when nobody is watching. For guest rooms, changing rooms, swimming pools and gyms. A cool setting is included. Three reasons for this model Press and hold button – the dryer runs only while the button is pressed and stops by itself when released. 1.800 W – with slide switch with 2 airflow and 3 temperature settings, COOL setting. Ripple wire SECURITY heating element – plus an overheat cut-out that resets itself once cooled. Specification Power1.800 W OperationOn/off push button, pressure must be maintained SettingsSlide switch with 2 airflow and 3 temperature settings, COOL setting Heating elementRipple wire SECURITY heating element NozzleConcentrator nozzle CableCoiled cable Overheat protectionSafety cut-out, resets itself once cooled Colourwhite/chromeModel542.14 W/C, manufacturer number 55420916 Suitable for Guest rooms, holiday flats, changing rooms and spa areas – anywhere an appliance must not keep running unattended. Less suitable for Anyone drying for long stretches will find constant pressure on the button tiring – for salons a professional dryer with a latching switch is the better choice. No wall bracket is documented for this model; it is a hand-held appliance. Why do hotel hair dryers have a button you must hold down? Because an appliance that only runs while the button is pressed cannot be left switched on by accident. That prevents overheating in an empty room, saves energy and extends service life. In public washrooms and changing rooms it is the usual design. Push button or latching switch? A latching switch stays where you put it. A push button falls back to off the moment you release it. For guest rooms that is precisely the difference that matters. What does Valera not state for this model? Voltage, frequency, motor type, airflow in m³/h, air temperature in °C, weight, noise level, cable length, protection class and IP rating are not given in the manufacturer documents available to us.
Action PROTECT 1600 Socket wall mounted hair dryer with socket
Wall mounted hair dryer with mains socket and RCD The Action PROTECT 1600 Socket combines a 1600 W wall mounted hair dryer with a full 16 A European socket in the wall holder. According to Valera the holder also contains a residual current device called ELECTROSTOP, rated at 10 mA. Short verdict The answer for hotel bathrooms where guests need a socket anyway: straighteners, chargers, electric toothbrushes. Instead of a separate bathroom socket it sits in the holder, behind the 10 mA protection. If you only want to supply shavers, a shaver socket is the better fit – it is limited to about 20 VA and therefore harder to misuse. Three reasons for this model 16 A European socket – an ordinary mains socket in the wall holder, not restricted to shavers. ELECTROSTOP rated at 10 mA – residual current device in the holder, per manufacturer. Distribution boards usually use 30 mA. Slide switch with cool setting – two airflow and three temperature settings including COOL. Specification Power1600 W SettingsSlide switch: 2 airflow, 3 temperature settings Cool settingYes, COOL OperationOn/off push button SocketEuropean standard socket, 16 A, in the wall holder Residual current deviceELECTROSTOP, 10 mA, in the wall holder Heating elementRipple wire SECURITY heating element Safety switchAutomatic on/off via the holder Overheat protectionSafety cut-out, resets itself once cooled Supply cable on siteH05VV-F 3G × 2.5 mm² – with protective earth NozzleConcentrator nozzle InstallationWall mounting, plugs and screws supplied Model542.06/044.03, manufacturer number 55420930 Suitable for Hotel bathrooms and guest rooms where dryer and socket should sit in one place. Less suitable for If you deliberately want the socket limited to shavers, choose a shaver socket version instead. Unlike the double insulated models in this range, this version needs a supply with a protective earth – worth noting at planning stage. Installation is a job for a qualified electrician, typically from a switched fused spur. How does a mains socket differ from a shaver socket? A shaver socket works through a safety isolating transformer and is limited to roughly 20 VA, so it is explicitly for shavers only – in the UK it is classed as a shaver supply unit under BS EN 61558-2-5. This is an ordinary 16 A socket: more flexible for guests, but without that limit. Do I still need an RCD in the consumer unit? The device in the holder supplements the installation, it does not replace it. What your building requires is for a qualified electrician to determine under the wiring regulations that apply locally. What does Valera not state for this model? Motor type, airflow in m³/h, air temperature in °C, weight, noise level, IP rating and whether a removable filter is fitted are not given in the manufacturer documents available to us. We will add them once Valera confirms them.
Action Super Plus 1200 black wall mounted hair dryer with holder 038A
Wall mounted hair dryer for the guest room The Action Super Plus 1200 is a wall mounted hair dryer rated 1.200 W. Switching: Slide switch with 2 airflow and 3 temperature settings, COOL setting. The wall holder supplied, type 038A, has its own on/off safety switch. Short verdict The better equipped version: at Valera „Super“ means the slide switch with settings and a cool position. The plain versions in the same range have a single fixed setting. Three reasons for this model 1.200 W for wall mounting – the wall holder is part of the delivery. Wall holder 038A with on/off safety switch Press and hold button – the dryer runs only while the button is pressed and stops when released. Specification Power1.200 W SettingsSlide switch with 2 airflow and 3 temperature settings, COOL setting OperationPress and hold button Heating elementRipple wire SECURITY heating element Wall holderType 038A with on/off safety switch, supplied NozzleConcentrator nozzle Protection classClass II, double insulated, no earth connection Overheat protectionSafety cut-out, resets itself once cooled Supply cable on siteH05VV-F 2 × 1.5 mm², max input current 10 A Model542.05/038A BL, manufacturer number 55420950 Suitable for Guest rooms, guest houses and holiday flats with fixed wall mounting. Less suitable for Valera excludes warranty for continuous use in gym and spa areas – the professional models belong there. Installation is a job for a qualified electrician, typically from a switched fused spur; the appliance is hardwired. What does 038A mean compared with 038B? Both are vertical housing wall holders of the same design. 038A has an on/off safety switch, 038B comes without a switch and is wired directly to the mains. The manufacturer instructions record no other difference. What separates „Super“ from the plain version? The settings, nothing else. The Super versions have the slide switch with selectable settings, the plain versions a single fixed setting. Power, heating element, nozzle and holder design are the same. What does Valera not state for this model? Voltage, frequency, motor type, airflow in m³/h, air temperature in °C, weight, noise level and IP rating are not given in the manufacturer documents available to us.
Action Super Plus 1200 black/chrome wall-mounted hair dryer with holder 038A
Action Super Plus 1200 in black: discreet in a dark bathroom The black version of the Action Super Plus 1200 (type 542.05/038A, Valera item 55420050) is technically identical to the white one: handheld hairdryer with 1200 W, 038A wall holder, two air flow and three temperature settings. At Valera this variant is listed as “Black Chrome”. Operation Two air flow settings and three temperature settings are selected with the slide switch, and there is an on/off push button on the handle. A cool air setting is available. The heating element is built in the “Ripple wire” design. A concentrator nozzle is included. 038A wall holder The supplied 038A wall holder has an on/off safety switch. The dryer hangs in the holder on the wall and therefore stays in the same place. This holder does not have a shaver socket – that belongs to the Shaver versions in the table further down. Safety and electrical data Double insulated, class II – no earth connection requiredThermal cut-out: switches off if the dryer overheats and resets itself after a few minutes of coolingMaximum current draw 10 AInstallation cable type H05VV-F 2 × 1.5 mm²Sound pressure level below 70 dB(A) The operating voltage is stated on the rating plate of the appliance. Warranty: 24 months for private end users, 12 months for commercial end users (Switzerland and EU). The range at a glance ModelOutputColourWall holderShaver socket Action Super Plus 1800 white1800 Wwhite038Ano Action Super Plus 1600 white1600 Wwhite038Ano Action Super Plus 1600 Shaver white1600 Wwhitenot specifiedyes Action Super Plus 1600 Shaver silver1600 Wsilvernot specifiedyes Action Super Plus 1200 white1200 Wwhite038Ano Action Super Plus 1200 black (this product)1200 Wblack038Ano
Action Super Plus 1200 white/chrome wall-mounted hair dryer with holder 038A
Action Super Plus 1200 in white: the 1200 W version of the range The Action Super Plus 1200 (type 542.05/038A, Valera item 55420048) is the 1200 W version of the range. Operation, holder and safety equipment match those of the stronger models, the power input is lower. At Valera this colour is called “White Chrome”. Operation Two air flow settings and three temperature settings are selected with the slide switch, and there is an on/off push button on the handle. A cool air setting is available. The heating element is built in the “Ripple wire” design. A concentrator nozzle is included. 038A wall holder The supplied 038A wall holder has an on/off safety switch. The dryer hangs in the holder on the wall and therefore stays in the same place. This holder does not have a shaver socket – that belongs to the Shaver versions in the table further down. Safety and electrical data Double insulated, class II – no earth connection requiredThermal cut-out: switches off if the dryer overheats and resets itself after a few minutes of coolingMaximum current draw 10 AInstallation cable type H05VV-F 2 × 1.5 mm²Sound pressure level below 70 dB(A) The operating voltage is stated on the rating plate of the appliance. Warranty: 24 months for private end users, 12 months for commercial end users (Switzerland and EU). The range at a glance The models with 1600 W and 1800 W have more output. ModelOutputColourWall holderShaver socket Action Super Plus 1800 white1800 Wwhite038Ano Action Super Plus 1600 white1600 Wwhite038Ano Action Super Plus 1600 Shaver white1600 Wwhitenot specifiedyes Action Super Plus 1600 Shaver silver1600 Wsilvernot specifiedyes Action Super Plus 1200 white (this product)1200 Wwhite038Ano Action Super Plus 1200 black1200 Wblack038Ano
Action Super Plus 1600 all black
Hard-wired wall-mounted hair dryer for the hotel bathroom The Action Super Plus 1600 in All Black is a 1,600 W wall-mounted hair dryer that stays fixed to the wall in its 038A holder. There is no plug and no socket on the holder: it is wired directly to the mains. Valera lists it among its hair dryers for hotel rooms. Short verdict The right dryer for guest bathrooms with no free socket – or where no socket is wanted. The handle only runs while the button is held down, so a dryer left running unnoticed is ruled out. Three reasons for this model Hard-wired through the 038A wall holder – no socket needed in the bathroom. Push button on the handle – the dryer only runs while the button is pressed and stops when released. 1,600 W with 2 airflow and 3 temperature settings plus COOL setting. Specification Power1,600 W ConnectionHard-wired through the wall holder, no plug, no socket Wall holderType 038A (vertical housing) with on/off switch, included OperationPush button on the handle, must be held down SettingsSlide switch with 2 airflow and 3 temperature settings, COOL setting Heating elementRipple wire SECURITY heating element NozzleConcentrator nozzle MotorDC motor (according to the Valera price list) Protection classDouble insulated, no earth connection Overheat protectionSafety cut-out, ready again after cooling down NoiseSound pressure level below 70 dB(A) Supply cable on siteH05VV-F 2 × 1.5 mm² Warranty24 months for private use, 12 months for commercial use Model542.06/038A BL, manufacturer number 55420938 Installation and connection Connection must be made by a qualified electrician. Valera requires an all-pole disconnecting device with at least 3 mm contact separation and recommends a residual current device of no more than 30 mA. The dryer must hang where nobody can reach it from the bath or shower. More in our guides Hotel hair dryer: hard-wired or plug and Mounting a wall hair dryer in the hotel bathroom. Suitable for Guest rooms and bathrooms in hotels, guesthouses and holiday flats – wherever the dryer should stay in its place. More models under Wall-mounted hair dryers and Hotel hair dryers; for whole properties see our hotel projects. Less suitable for Bathrooms where the dryer should simply be plugged in without an electrician – a model with a plug such as the Action 1600 Push fits better. For heavily used areas like pools or gyms, Valera offers dedicated, more robust models. How does the Action Super Plus 1600 differ from the 1800? Only in power. Holder, settings, push button and features are the same; the Action Super Plus comes with 1,200, 1,600 and 1,800 W. You will find the 1,800 W version in the same category. Does the wall holder have a socket? No, the 038A holder has no socket. If you want a shaver socket on the holder, choose the Action Super Plus 1600 Shaver. Which colours are available? Valera supplies the Action Super Plus in white/chrome, black/chrome and all black. What does Valera not state? Valera does not state weight, cable length or IP rating for this model. Source of the details: Valera product page, data sheet and user guide.
Action Super Plus 1600 black/chrome wall-mounted hair dryer with holder 038A
Wall-mounted hair dryer with safety holder for standard guest rooms The Action Super Plus 1600 (Valera model 542.06/038A) is the solid basic option for guest bathrooms: a 1,600 W handheld dryer, a wall holder with on/off safety switch and no socket on the holder. If you want to equip rooms consistently without buying a top-of-the-range unit for each one, this is often where you end up. How does the safety switch work? The dryer is inserted into holder 038A from above. The switch in the holder cuts the power while the dryer is hung up – it is only ready for use once it is taken out. A dryer left running in its holder is therefore ruled out. Valera also offers the same holder without a switch (038B). 1200, 1600 or 1800 W? According to Valera, the Action Super Plus models differ only in power: 1,200, 1,600 or 1,800 W with the same features. 1,600 W is the middle ground for most city and business hotels; for properties with many long-haired guests, the 1,800 W version is worth a look. Black chrome finish The black version has chrome accents and suits dark or mixed bathroom designs. The Action Super Plus 1600 is also available in white chrome and All Black. Connection The holder is double insulated and, according to Valera's instructions, can be hardwired through the back panel or operated with a detachable supply cable. What matters when planning is covered in our guide Hotel hair dryer: hardwired or with a socket. Technical data Power: 1,600 W, SECURITY corrugated-wire heating element Slide switches: 2 speed and 3 heat settings, COOL setting, on/off button Wall holder 038A with on/off safety switch Double insulated; supply cable H05VV-F 2 × 1.5 mm² Supplied with: concentrator nozzle Valera wall-mounted hair dryers with holder compared ModelValera modelPowerHolderSocket on holder Excel 1800 TF561.191,800 WRing holder 034, no switchno Action Super Plus 1600 black (this page)542.06/038A1,600 W038A with on/off safety switchno Premium Smart 1600 Shaver533.05/044.051,600 W044.05 with on/off safety switchShaver socket Premium Smart 1600 Socket533.05/044.021,600 W044.02 with on/off switchSchuko 16 A Valera gives a 24-month warranty for private use and 12 months for commercial use. A safety thermostat switches the appliance off if it overheats and resets itself once it has cooled down.
Action Super Plus 1600 Shaver silver
Action Super Plus 1600 Shaver in silver: a match for chrome and stainless steel The silver version is technically the same as the white one: handheld hairdryer with 1600 W, wall holder with built-in shaver socket, two air flow and three temperature settings. The colour suits fittings and accessories in chrome or stainless steel; at Valera it is listed as “Silver”. Operation Two air flow settings and three temperature settings are selected with the slide switch, and there is an on/off push button on the handle. A cool air setting is available. The heating element is built in the “Ripple wire” design. A concentrator nozzle is included. The wall holder with shaver socket The supplied wall holder has a built-in shaver socket, so the dryer and the socket sit at one spot on the wall. We will give you the electrical specifications of the shaver socket on request – please ask for them before the electrician opens the wall. Safety and electrical data Double insulated, class II – no earth connection requiredThermal cut-out: switches off if the dryer overheats and resets itself after a few minutes of coolingMaximum current draw 10 AInstallation cable type H05VV-F 2 × 1.5 mm²Sound pressure level below 70 dB(A) The operating voltage is stated on the rating plate of the appliance. Warranty: 24 months for private end users, 12 months for commercial end users (Switzerland and EU). The range at a glance ModelOutputColourWall holderShaver socket Action Super Plus 1800 white1800 Wwhite038Ano Action Super Plus 1600 white1600 Wwhite038Ano Action Super Plus 1600 Shaver white1600 Wwhitenot specifiedyes Action Super Plus 1600 Shaver silver (this product)1600 Wsilvernot specifiedyes Action Super Plus 1200 white1200 Wwhite038Ano Action Super Plus 1200 black1200 Wblack038Ano
Action Super Plus 1600 Shaver wall hair dryer with shaver socket, black/chrome
Wall mounted hair dryer with shaver socket for international guests The Action Super Plus 1600 Shaver is a 1600 W wall mounted hair dryer. The wall holder, type 044.05, carries a universal shaver socket for 110–120 V and 220–240 V plus an automatic on/off safety switch. This version comes in black/chrome. Short verdict The obvious choice for properties with overseas guests: a US shaver works in this socket just as a European one does. The holder switches the appliance by itself – out of the holder it runs, back in it stops. If you also need a residual current device in the holder, look at the PROTECT range. Three reasons for this model Shaver socket 110–120 V and 220–240 V – through a safety isolating transformer, for shavers only, maximum 20 VA. Automatic holder switch – appliance in the holder means off, out of the holder means on. 1600 W with cool setting – slide switch with two airflow and three temperature settings. Specification Power1600 W SettingsSlide switch: 2 airflow, 3 temperature settings Cool settingYes, COOL OperationSlide switch and on/off push button Wall holderType 044.05 with universal shaver socket and on/off safety switch Shaver socket110–120 V and 220–240 V, max 20 VA, shavers only TransformerSafety isolating transformer Heating elementRipple wire SECURITY heating element Protection classClass II, double insulated, no earth connection Overheat protectionSafety cut-out, resets itself once cooled NozzleConcentrator nozzle Colourblack/chrome Model542.06/044.05 B/C, manufacturer number 55420961 Suitable for Hotel bathrooms serving international guests, holiday flats and apartments. Less suitable for The shaver socket takes shavers up to 20 VA only – chargers, toothbrushes and other small appliances do not belong in it. This holder has no residual current device; holders 044.03, 044.04 and 044.06 cover that. Which wall hair dryer has a shaver socket for international guests? This design. The socket supplies 110–120 V and 220–240 V, so a shaver bought in the US works as well as a European one. In the UK such an accessory counts as a shaver supply unit under BS EN 61558-2-5, which is what permits it in bathroom zone 2. What do holder numbers 044.01 to 044.06 mean? They describe the wall holder, not the dryer. 044.05 is the holder with universal shaver socket and switch. 044.03 adds a 10 mA residual current device and a 16 A socket, 044.06 combines the RCD with a shaver socket. What does Valera not state for this model? Appliance voltage, motor type, airflow in m³/h, air temperature in °C, weight, noise level, IP rating and whether a removable filter is fitted are not given in the manufacturer documents available to us.
Action Super Plus 1600 Shaver wall hair dryer with shaver socket, silver
Wall mounted hair dryer with shaver socket for international guests The Action Super Plus 1600 Shaver is a 1600 W wall mounted hair dryer. The wall holder, type 044.05, carries a universal shaver socket for 110–120 V and 220–240 V plus an automatic on/off safety switch. This version comes in silver. Short verdict The obvious choice for properties with overseas guests: a US shaver works in this socket just as a European one does. The holder switches the appliance by itself – out of the holder it runs, back in it stops. If you also need a residual current device in the holder, look at the PROTECT range. Three reasons for this model Shaver socket 110–120 V and 220–240 V – through a safety isolating transformer, for shavers only, maximum 20 VA. Automatic holder switch – appliance in the holder means off, out of the holder means on. 1600 W with cool setting – slide switch with two airflow and three temperature settings. Specification Power1600 W SettingsSlide switch: 2 airflow, 3 temperature settings Cool settingYes, COOL OperationSlide switch and on/off push button Wall holderType 044.05 with universal shaver socket and on/off safety switch Shaver socket110–120 V and 220–240 V, max 20 VA, shavers only TransformerSafety isolating transformer Heating elementRipple wire SECURITY heating element Protection classClass II, double insulated, no earth connection Overheat protectionSafety cut-out, resets itself once cooled NozzleConcentrator nozzle Coloursilver Model542.06/044.05 SR, manufacturer number 55420963 Suitable for Hotel bathrooms serving international guests, holiday flats and apartments. Less suitable for The shaver socket takes shavers up to 20 VA only – chargers, toothbrushes and other small appliances do not belong in it. This holder has no residual current device; holders 044.03, 044.04 and 044.06 cover that. Which wall hair dryer has a shaver socket for international guests? This design. The socket supplies 110–120 V and 220–240 V, so a shaver bought in the US works as well as a European one. In the UK such an accessory counts as a shaver supply unit under BS EN 61558-2-5, which is what permits it in bathroom zone 2. What do holder numbers 044.01 to 044.06 mean? They describe the wall holder, not the dryer. 044.05 is the holder with universal shaver socket and switch. 044.03 adds a 10 mA residual current device and a 16 A socket, 044.06 combines the RCD with a shaver socket. What does Valera not state for this model? Appliance voltage, motor type, airflow in m³/h, air temperature in °C, weight, noise level, IP rating and whether a removable filter is fitted are not given in the manufacturer documents available to us.
Action Super Plus 1600 Shaver wall hair dryer with shaver socket, white/chrome
Wall mounted hair dryer with shaver socket for international guests The Action Super Plus 1600 Shaver is a 1600 W wall mounted hair dryer. The wall holder, type 044.05, carries a universal shaver socket for 110–120 V and 220–240 V plus an automatic on/off safety switch. This version comes in white/chrome. Short verdict The obvious choice for properties with overseas guests: a US shaver works in this socket just as a European one does. The holder switches the appliance by itself – out of the holder it runs, back in it stops. If you also need a residual current device in the holder, look at the PROTECT range. Three reasons for this model Shaver socket 110–120 V and 220–240 V – through a safety isolating transformer, for shavers only, maximum 20 VA. Automatic holder switch – appliance in the holder means off, out of the holder means on. 1600 W with cool setting – slide switch with two airflow and three temperature settings. Specification Power1600 W SettingsSlide switch: 2 airflow, 3 temperature settings Cool settingYes, COOL OperationSlide switch and on/off push button Wall holderType 044.05 with universal shaver socket and on/off safety switch Shaver socket110–120 V and 220–240 V, max 20 VA, shavers only TransformerSafety isolating transformer Heating elementRipple wire SECURITY heating element Protection classClass II, double insulated, no earth connection Overheat protectionSafety cut-out, resets itself once cooled NozzleConcentrator nozzle Colourwhite/chrome Model542.06/044.05 W/C, manufacturer number 55420962 Suitable for Hotel bathrooms serving international guests, holiday flats and apartments. Less suitable for The shaver socket takes shavers up to 20 VA only – chargers, toothbrushes and other small appliances do not belong in it. This holder has no residual current device; holders 044.03, 044.04 and 044.06 cover that. Which wall hair dryer has a shaver socket for international guests? This design. The socket supplies 110–120 V and 220–240 V, so a shaver bought in the US works as well as a European one. In the UK such an accessory counts as a shaver supply unit under BS EN 61558-2-5, which is what permits it in bathroom zone 2. What do holder numbers 044.01 to 044.06 mean? They describe the wall holder, not the dryer. 044.05 is the holder with universal shaver socket and switch. 044.03 adds a 10 mA residual current device and a 16 A socket, 044.06 combines the RCD with a shaver socket. What does Valera not state for this model? Appliance voltage, motor type, airflow in m³/h, air temperature in °C, weight, noise level, IP rating and whether a removable filter is fitted are not given in the manufacturer documents available to us.